Pricing

  • SaraKIT Assistant
  • $x00
  • - three mirophones
    - amplified stereo output
    - two bldc drivers
    - Digital Accelerometer 3-Axis
    - 11 GPIO
    - Two camera interfaces CSI
    - flex cable
    - hub interface

  • Notify Me
  • SaraKIT Full
  • $10900
  • - three mirophones
    - amplified stereo output
    - two bldc drivers
    - Digital Accelerometer 3-Axis
    - 11 GPIO
    - Two camera interfaces CSI
    - flex cable
    - hub interface

  • Buy Now
  • SaraKIT
  • $x00
  • - three mirophones
    - amplified stereo output
    - two bldc drivers
    - Digital Accelerometer 3-Axis
    - 11 GPIO
    - Two camera interfaces CSI

  • Notify Me
  • Flex
  • $x00
  • - flex cable for two camera CSI hub
  • Notify Me
  • Camera Hub
  • $x00
  • - hub interface for two CSI camera and 6D Digital Accelerometer/Gyroscope/ Temperature LSM6DS3TR, 2g/4g/8g/16g, +-125..2000 dps, 16-bit, I2C/SPI interfaces

  • Notify Me

Case and Platform

  • Plexi Case
  • $5
  • Plexiglass housing, more photos in our gallery.
    Buy or cut yourself - 3D .dxf file is here

  • Notify Me
  • White Case
  • $19
  • Printed in 3D, more photos in our gallery.
    Buy or print yourself - 3D .stl file is here

  • Notify Me
  • Yellow Case
  • $15
  • Printed in 3D, more photos in our gallery.
    Buy or print yourself - 3D .stl file is here

  • Notify Me
  • Transparent Case
  • $29
  • Printed in 3D, more photos in our gallery.
    Buy or print yourself - 3D .stl file is here

  • Notify Me
  • Black Case
  • $15
  • Printed in 3D, more photos in our gallery.
    Buy or print yourself - 3D .stl file is here

  • Notify Me
  • PAN/TILT Holder1
  • (Lower part)
    Printed in 3D, more photos in our gallery.
    Buy or print yourself - 3D .stl file is here

  • Notify Me
  • PAN/TILT HOLDER2
  • (two cam holder)
    Printed in 3D, more photos in our gallery.
    Buy or print yourself - 3D .stl file is here

  • Notify Me
  • PAN/TILT HOLDER3
  • (one cam holder)
    Printed in 3D, more photos in our gallery.
    Buy or print yourself - 3D .stl file is here

  • Notify Me
  • SaraKIT Lego1
  • PCB holder
    Printed in 3D, more photos in our gallery.
    Buy or print yourself - 3D .stl file is here

  • Notify Me
  • SaraKIT Lego2
  • Gimbal Holder
    Printed in 3D, more photos in our gallery.
    Buy or print yourself - 3D .stl file is here

  • Notify Me

Recommended

We recommend additives that can be purchased from various suppliers
  • PowerBank
  • Power Bank USB-C with PD (Power Delivery 2.0, 3.0 Fast Charging or Quick Charging 4.0)
    22W minimum for two small gimbal motor

  • Find on Amazon
  • PD Triger 12V
  • Connect the power with the PowerBank (PD2.0 PD3.0 Fast Charging and QC4 with USB-C output). USB-C Pd Trigger Module Pd 12v.

  • Find on Amazon
lorem